[PC-WIN] AlfaOBD ITA

AlfaOBD è un software per la diagnostica dei veicoli prodotti dal gruppo Fiat Chrysler Automobiles (FCA). Sono supportate le auto Fiat / Alfa Romeo / Lancia 1994-2021 e le auto Chrysler / Dodge / Ram / Jeep 2005-2021. Sebbene il software sia destinato principalmente ai proprietari di auto, fornisce molte delle funzionalità degli scanner professionali.

AlfaOBD supporta nativamente le Centraline Elettroniche (ECU) installate sui veicoli del gruppo FCA. Il supporto nativo differenzia AlfaOBD dalle applicazioni diagnostiche OBDII/EOBD fornendo un accesso limitato ai moduli motore e trasmissione e talvolta all’ABS.

Compatibile per tutti i sistemi Windows a 64Bit.

Consiglio di utilizzare jdownloader per il download delle varie parti e WinRaR per gestire gli archivi

Procedimento per l’installazione

• Scaricare l’archivio da QUI (v2.3.6) [3 Mirror] (Password: apritisesamo)
• Disattivare l’antivirus
• All’interno del pacchetto troverete il file Guida.txt contenente tutti i passaggi per l’installazione
• FINE

Ringraziamo Antonio C. per aver condiviso il pacchetto e la guida

Interfacce OBD supportate:

• OBDLink MX+/LX/EX/SX/CX and STN11xx – STN21xx based devices. The OBDLink MX+ Bluetooth or OBDLink EX  USB are the recommended interfaces for the cars with high-speed CAN bus on pins 6 and 14 and the middle-speed CAN bus on the pins 3 and 11 of the car OBD socket. These are most of the PowerNet and CUSW-based Chrysler/Dodge/Ram(with the exception of RAM Pro Master before 2022 and RAM Pro Master City)/Jeep vehicles starting from about 2012, and Fiat Tipo/Egea. No additional adapters are needed on these cars when using OBDLink EX or MX+. As the OBDLink interfaces have high communication speed they are especially recommended for the Body computer configuration adjustment and odometer correction on Chrysler/Dodge/Ram/Jeep vehicles.
  Note: Alfa Romeo Giulia/Stelvio, Fiat 500E(2020+)/500X/Argo/Chronos/Toro, Jeep Renegade/Compass (MP), and RAM Pro Master (2022+) require the “grey” adapter (see below) for the access to the second high-speed CAN bus.
  The LX/SX/CX interfaces require the “blue” adapter for the access to the middle-speed CAN bus.
  The OBDLink LX/SX/CX devices are recommended for other Fiat/Alfa Romeo/Lancia CAN-based cars with the low-speed CAN bus on pins 1 & 9 of the OBD plug. The “yellow” adapter is required for the access to the low-speed CAN bus.
• OBDKey Bluetooth/USB/WLAN. A universal interface supporting all the control units installed on the FCA cars. Especially recommended for the non-CAN-based cars. It is a good choice (and the only one under Android) for the cars like Alfa Romeo 145/146/156/166. The new multipin version doesn’t require additional adapters to switch between the OBD socket pins! 

• ELM327 – based USB / Bluetooth / WLAN interfaces for PC and bluetooth/WiFi-enabled Android and Windows devices. All CAN units are supported and some on K-Line. Make sure the ELM 327 is of version 1.3 and above.
  Warning: There are many suppliers of these interfaces, but not all of the interfaces are compatible with AlfaOBD!
  An e-bay interface based on the ELM327 clone may work fine, but there are many interfaces on the market now which don’t follow the ELM327 specs. They may be not able to establish connection to the car at all, or they may have issues with certain diagnostic procedures. If AlfaOBD displays the message “Interface reports NO DATA” or “Interface reports CAN ERROR” when attempting the connection to the car, this is most probably a sign that you have a defective interface. Such an interface may work fine with an OBDII/EOBD diagnostic software, it has issues with AlfaOBD because of a different diagnostic protocol used. 
  It is recommended to use an ELM327 interface tested with AlfaOBD.
  For example, the interfaces sold by Electronic-Fuchs.de have been tested for compatibility with AlfaOBD.
• Kiwi 3 Bluetooth LE (Android only). All CAN units are supported and some K-Line ones. The interface features very low power consumption.
• KLLine USB interface. AlfaOBD PC version only due to limitations of Android OS. No CAN support so it can be used on the non-CAN based vehicles. For example, interfaces supplied by Electronic-Fuchs.de, Obdauto.fr , and ECUFix.com  are supported.